Part 546036629 Hus Grinding Wheel 29Mm

Part #546036660, Hus Grinding Wheel - 6.0Mm

Part #546036660, Hus Grinding Wheel - 6.0Mm. Part #546036660, Hus Grinding Wheel - 6.0Mm... - Part #546036660, Hus Grinding Wheel - 6.0Mm.

Part #546036679, Hus Grinding Wheel - 8.0Mm

Part #546036679, Hus Grinding Wheel - 8.0Mm. Part #546036679, Hus Grinding Wheel - 8.0Mm... - Part #546036679, Hus Grinding Wheel - 8.0Mm.

Part #546036632, Hus Grinding Wheel - 3.2Mm

Part #546036632, Hus Grinding Wheel - 3.2Mm. Part #546036632, Hus Grinding Wheel - 3.2Mm... - Part #546036632, Hus Grinding Wheel - 3.2Mm.

Part #546036647, Hus Grinding Wheel - 4.7Mm

Part #546036647, Hus Grinding Wheel - 4.7Mm. Part #546036647, Hus Grinding Wheel - 4.7Mm... - Part #546036647, Hus Grinding Wheel - 4.7Mm.

Hazet Rough Grinding Wheel Set 9233-011/10

Hazet Rough Grinding Wheel Set 9233-011/10.

10 rough grinding wheels 125 x 6 x 22.23 mm (5 x 1⁄4 x 7⁄8″ )

• For cordless right-angle grinders 9233-7 ? 9233-7/4
• 27 AS 24 O7 BF
• Also suitable for stainless steel
• Standards: DIN EN 12413 an... - Hazet Rough Grinding Wheel Set 9233-011/10.

Eastwood 15/64 Inch Depressed Center Grinding Wheel - 5 Pack

Eastwood 15/64 Inch Depressed Center Grinding Wheel - 5 Pack.

Do the Job Right with an Eastwood 4.5" x 15/64" Depressed Center Cut Off Wheel.

Eastwood Cut Off Wheel Features:

Dynamic Tools 29mm X 1in Drive, 6 Point Standard Length, Impact Socket D025029

Dynamic Tools 29mm X 1in Drive, 6 Point Standard Length, Impact Socket D025029.

• 1 in. Drive
• Drive Type: 6 Point
• Corrosion resistant black phosphate finish.
• Large laser etched markings improve size identification and provide differentiation between SAE and metric sizes.
• Meets ANSI stan... - Dynamic Tools 29mm X 1in Drive, 6 Point Standard Length, Impact Socket D025029.

Dynamic Tools 29mm 12 Point Combination Wrench, Contractor Series, Satin Finish D074429

Dynamic Tools 29mm 12 Point Combination Wrench, Contractor Series, Satin Finish D074429.

• Drive Type: 12 Point
• Size hard stamped at the open end for quick size identification.
• Satin chrome finish.
• 15° angled open and 15° offset boxed end.
• Meets ANSI standards.
• Limited Lifetime ... - Dynamic Tools 29mm 12 Point Combination Wrench, Contractor Series, Satin Finish D074429.

Dynamic Tools 1/2in. Drive 6 Point Metric 29mm Standard Length Impact Socket D014029

Dynamic Tools 1/2in. Drive 6 Point Metric 29mm Standard Length Impact Socket D014029.

• Drive Type: 6 Point
• 1/2 in. Drive
• Corrosion resistant black phosphate finish.
• Large laser etched markings improve size identification and provide differentiation between SAE and metric sizes.
• Meets ANSI st... - Dynamic Tools 1/2in. Drive 6 Point Metric 29mm Standard Length Impact Socket D014029.