GE Part wb02K10023 Clamp Heat E 800 x 750 x 050

Locking Material Clamp - Portaband - PBP-CLAMP

Locking Material Clamp - Portaband - PBP-CLAMP.

Use this clamp to secure material for cutting in your Milwaukee or Dewalt Portaband Pro. Clamps material up to 4-3/4" high and slides in the slot on the left side of the jig.

Warranty:

OEMTools HEAT GUN

OEMTools HEAT GUN.

The OEMTOOLS Dual Temp Heat Gun is used for removing paint, heating shrink wrap, thawing pipes, loosening seized bolts and nuts and other applications. It is built with a powerful 10 Amp, 120V, 60Hz motor to get the job done. It features a 3 posit... - OEMTools HEAT GUN.

Rockwood® 1500W Heat Gun

Rockwood® 1500W Heat Gun.

The Rockwood 1500 Watt Heat Gun offers a convenient 3-position switch featuring OFF, 572°F [300°C] and 1022°F [550°C] with matched Low & Hi fan settings.

• Powerful 1500W Output
• Dual Heat Settings 572 to 1022 Degrees F
... - Rockwood® 1500W Heat Gun.

Part #4-578-029-01, Heat Sink (R (488)), Vc

Part #4-578-029-01, Heat Sink (R (488)), Vc. Part #4-578-029-01, Heat Sink (R (488)), Vc... - Part #4-578-029-01, Heat Sink (R (488)), Vc.

Part #4-578-011-01, Heat Sink (B (488)), Vc

Part #4-578-011-01, Heat Sink (B (488)), Vc. Part #4-578-011-01, Heat Sink (B (488)), Vc... - Part #4-578-011-01, Heat Sink (B (488)), Vc.

Part #4-450-925-01, Heat Sink, P

Part #4-450-925-01, Heat Sink, P. Part #4-450-925-01, Heat Sink, P... - Part #4-450-925-01, Heat Sink, P.

Part #4-422-327-01, Heat Sink, P

Part #4-422-327-01, Heat Sink, P. Part #4-422-327-01, Heat Sink, P... - Part #4-422-327-01, Heat Sink, P.

Part #4-135-798-01, Heat Sink (Bm)

Part #4-135-798-01, Heat Sink (Bm). Part #4-135-798-01, Heat Sink (Bm)... - Part #4-135-798-01, Heat Sink (Bm).

Part #4-127-617-01, Heat Sink (T-Con Std)

Part #4-127-617-01, Heat Sink (T-Con Std). Part #4-127-617-01, Heat Sink (T-Con Std)... - Part #4-127-617-01, Heat Sink (T-Con Std).